2003 Toyota Premio ZZT240
Situation
A/C lamp was blinking after a short time when the A/C switch turned on.
Cause
Faulty A/C magnet clutch
Maintenance
The panel diagnosis noticed No22 that meant locked compressor.
Then I checked the magnet clutch and measured the resistance.
The resistance should be185+-20ohm.
But it was 250ohm. Then I changed new magnet clutch.
-
Showing posts with label Toyota Premio. Show all posts
Showing posts with label Toyota Premio. Show all posts
5/25/2012
4/10/2012
Toyota Corona Premio AT210 Engine Hesitate
2000 Toyota Corona Premio AT210 Engine Model 4A-FE
Situation
The engine speed did not get high smoothly and Engine check lamp lit .
After that The lamp cleared.
Accelration got high properly at an idle.
Mileage was over 230.000km.
The owner often change engine oil.
Cause
Faulty Cylinder Pressure Sensor
Maintenance
The Cylinder compressions were properly.
Then I checked diagnosis . It noticed P1105:36 which meant faulty Cylinder pressure sensor.
It was at the No1 cylinder. I needed to replace it SST.
I replaced the new cylinder pressure sensor.
Situation
The engine speed did not get high smoothly and Engine check lamp lit .
After that The lamp cleared.
Accelration got high properly at an idle.
Mileage was over 230.000km.
The owner often change engine oil.
Cause
Faulty Cylinder Pressure Sensor
Maintenance
The Cylinder compressions were properly.
Then I checked diagnosis . It noticed P1105:36 which meant faulty Cylinder pressure sensor.
It was at the No1 cylinder. I needed to replace it SST.
I replaced the new cylinder pressure sensor.
3/30/2012
TOYOTA PREMIO AT211 Bad Accelration
1996 Toyota Premio AT211 bad acceleration
Engine model 7A-FE
Situation
The engine speed did not get high smoothly and run smoothly at an idle.
Cause
Exchanged all spark plugs , then it run smoothly
.
After delete the cord , it showed normally.
Checked No3 and 4 plug , replaced No1 and 2.
Then got high smoothly and was good idling.
I exchanged new spark plugs.
Engine model 7A-FE
Situation
The engine speed did not get high smoothly and run smoothly at an idle.
Cause
Exchanged all spark plugs , then it run smoothly
.
The contents of the maintenance
There was an alarm on the diagnosis system with the throttle sensor.After delete the cord , it showed normally.
Checked No3 and 4 plug , replaced No1 and 2.
Then got high smoothly and was good idling.
I exchanged new spark plugs.
Subscribe to:
Posts (Atom)